70cc Stage6 Sport PRO This is the stuff we're having made in Italy by Athena, so there is no one in-between making any profit. The same sort of money that usually gets you a humble cast iron cylinder will buy you a plated aluminium cylinder here. A comparatively tame exhaust port timing together with a huge port area make for an extremely torquey kit which will also rev on nicely. There are not many cylinders powerful enough to stand the Pro's pa...

---

Nom: Stage6 Kit cylindre SPORT PRO 70cc, Piaggio AC  Prix: 239.99  Sku: s6-7014000  msrp: 0.00 
Plus d'informations

***EXCEPTION peux etre adapter sur aprilia sr factory piaggio engine sans compresseur avec kit 5512894 SEULEMENT*** Stage6 HPC Crankshaft This Stage6 crankshaft is a high quality full circle crankshaft that has been developed working closely with F. Koopmann. It increases primary compression in the crankcase and is made completely of metal (no plastic padding). This crankshaft can handle up to 16,000 rpm ! Made in Italy.Particular attention has b...

---

Nom: STAGE6 HPC CRANKSHAFT PIAGGIO  Prix: 299.99  Sku: S6-8014000  msrp: 0.00 
Plus d'informations

Cylinder Kit 70cc Malossi Sport With this 70cc version, Malossi offers a cast-iron cylinder for daily use. Its acceleration is a bit weaker than the one of the Polini Sport, but on the other hand its ideal rpm range is about 800 rpm higher, which translates into slightly better peak power. When combined with Laser X Pro or Yasuni R, you'll get an easy-to-adjust, strong sport cylinder. It can also be used with the original carb, as long as the jet...

---

Nom: MALOSSI_70CC KIT CYLINDER fonte PIAGGIO ENGINE AC  Prix: 219.99  Sku: 31 6926  msrp: 0.00 
Plus d'informations

Cylinder Polini 70cc Sport ** je donne 5 ETOILE**Polini, the market leader in two stroke tuning, have produced this reliable cast-iron kit for everyday use. Will work with the original carburettor although mainjet should be increased by aprox. 8-10%, power output up to 9 Bhp. Remarkable because of its massive bottom end punch, which makes it a wheely addict's premier choice. Comes with gaskets, piston and cylinder-head. We recommend Bosch's W3CC ...

---

Nom: POLINI KIT cylindre 70cc SPORT FONTE PIAGGIO TYPHOON / DERBI  Prix: 269.95  Sku: 140.0181  msrp: 0.00 
Plus d'informations

Corsa cylinder kit, 70 cc, Polini If combined with the right components (race-exhaust, carburettor,...) Polini's Corsa kit will produce up to 14 Bhp; topspeed will be up to 120 kph. This kit should be run on a carb of at least 17,5mm diameter, only then will there be sufficient internal cooling. If set up properly, this kit may be very reliable. Kit comes complete with head, gaskets, piston, a set of carbon reeds and the correct spark-plug. Check...

---

Nom: POLINI KIT cylindre 70cc CORSA PIAGGIO TYPHOON/DERBI  Prix: 339.95  Sku: 140.0181/R  msrp: 0.00 
Plus d'informations

***PEUX ETRE ADAPTER SUR aprilia sr factory piaggio engine avec le kit conversion cdi 5512894*** Cylinder Kit 70cc Malossi Sport With this 70cc version, Malossi offers a cast-iron cylinder for daily use. Its acceleration is a bit weaker than the one of the Polini Sport, but on the other hand its ideal rpm range is about 800 rpm higher, which translates into slightly better peak power. When combined with Laser X Pro or Yasuni R, you'll get an ...

---

Nom: MALOSSI_70CC CYLINDER KIT PIAGGIO LC 12mm  Prix: 339.95  Sku: 31 7353  msrp: 0.00 
Plus d'informations

Cyl.Malossi MHR Racing 70cc Malossi's most powerful cylinder for the public (ok, there is the MHR team which costs an arm and a leg). Bore 47.6mm, power up to 20-21Bhp. 6 transfer ports. Minarelli version only for 12mm gudgeon pin Le cylindre Streetracer, le plus puissant de chez Malossi avant le Team. L'un des meilleurs cylindres pour PIAGGIO et Peugeot horizontal ECT. Attention, comme sur tous les cylindre en aluminium vous devrez impérativemen...

---

Nom: MALOSSI_CYLINDRE KIT MHR 47mm PIAGGIO AC  Prix: 499.99  Sku: 31 8398  msrp: 0.00 
Plus d'informations

Cylinder Kit Malossi MHR Replica 70cc The MHR Replica is a 70cc aluminium racing cylinder comparable in performance to Polini Corsa. As the MHR Replica is, in contrast to the Corsa, made of aluminium, which dissipates heat better than cast-iron, it has much better thermal properties. In order to ensure sufficient inner cooling and achieve good performance, we recommend at least a 17.5mm carb. We suggest using a Stage6 Pro exhaust or the Nardo fro...

---

Nom: MALOSSI CYL KIT ALU 12MM REPLICA PIAGGIO 31 8463  Prix: 369.95  Sku: 31 8463  msrp: 0.00 
Plus d'informations

**BEARING POUR VILBREQUIN PIN PISTON 12MM**peugeot FIT AVEC  Peugeot Stage6 crankshaft** Stage6 small-end bearing 12mm High quality silver small end bearings from Stage6 (12mm version). The best bearings available on the market! These are the only ones we use with our race engines. Very resistant construction. Attention: With Suzuki models, this bearing only fits with 70cc pistons!!! dimensions: 12 x 17 x 15mm Fits the following Models:  Adly A...

---

Nom: Stage6 piston small-end bearing 12mm  Prix: 22.99  Sku: S6-802010  msrp: 0.00 
Plus d'informations

Cylinder Hebo 70cc Manston Replica The replica version of the high-end Hebo Manston cylinder. This aluminium cylinder is also equipped with a bridged exhaust port and a modular cylinder head. More bottom-end power than Italkit, which results in more torque but top performance isn't that high. The finish is really beautiful: very tidy ports.

---

Nom: HEBO Cylindrekit 70CC MANDSON REPLICA PIAGGIO AC  Prix: 339.95  Sku: HR4000181N  msrp: 339.95 
Plus d'informations

Cylinder Polini Evolution 50cc **PIAGGIO ENGINE** **SPECIAL:199.99$ DETAIL:359.99** Racing thoroughbred by Polini. If you want maximum performance with 50cc, this is the kit to get. Comes with a bridged exhaust port. With the respective exhaust and carb, power can be up to 16 bhp. Extra power can be unleashed by matching the transfers of the cylinder to the casing. A racing crankshaft with high primary compression is a must.

---

Nom: POLINI KIT PIAGGIO AC 2T 51CC EVOLUTION  Prix: 199.99  Sku: 140.0195  msrp: 359.99 
Plus d'informations

Cylinder Kit Polini Evolution 70cc **PIAGGIO ENGINE** **SPECIAL:299.99 DETAIL:525.00** The MHR, the Manston and the Evolution cylinder kits are in a league of their own. Bore is 47.6mm, cylinder is aluminium with an extremely durable chrome nikasil plating. 6 tranfer ports and a massive bridged exhaust port are good for up to 21 bhp if combined with the appropriate Evo exhaust and a carb of 19 to 25mm in size. A racing crankshaft is a definite ...

---

Nom: POLINI KIT PIAGGIO ALU 70CC EVOLUTION  Prix: 299.99  Sku: 140.0193  msrp: 525.00 
Plus d'informations